DST file converter
To convert a DST file, upload the .dst to this DST file converter and pick the output: PES for Brother, JEF for Janome, EXP for Bernina or Melco, or VP3 for Husqvarna Viking and Pfaff. The tool copies the stitches one to one, without resizing, and reports the stitch count, color stops and design size.
By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .
DST, PES, JEF, EXP, VP3, PNG, JPG, JPEG, WEBP, PDF, SVG up to 25 MB
How to convert a DST file to another embroidery format, step by step
- Upload the DST file (the page also accepts PES, JEF, EXP and VP3 stitch files).
- Pick the format your machine reads.
- Check the preview, stitch count and the smallest hoop the design fits.
- Download the converted file and assign thread colors on the machine if the source was a DST.
DST file converter tested with a real logo
We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

- Test file
- DST made from the same badge
- Output
- PES
- Finished size
- 90.1 x 89.6 mm
- Hoop it fits
- 4 x 4 in
- Stitches
- 6,823
- Thread colors
- 4
- File size
- 57 KB
- Processing time
- 0.3 s
How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.
What changes when the DST file converter writes PES or JEF
Stitch-to-stitch conversion keeps every needle position. What changes is the container: PES and JEF carry thread colors and a hoop code, while DST only has color stops. Since a DST has no colors to copy, the converted file gets placeholder threads that you can change on the machine.
The converter reports the smallest standard hoop the design fits with 5 mm clearance. If a PES shows up as too large on a Brother machine, that number tells you whether the design or the hoop setting is the problem.
Using the DST file converter as a free viewer
The preview on this page is a real render of the stitches in the file, drawn in order, so it doubles as a free DST viewer. It is useful when a customer sends a DST and you want to confirm what it is before loading it.
If you need a DST rather than from one, upload a PNG, JPG, PDF or SVG instead and the same page creates it.
How the DST file converter names your files
The converted file keeps the original name with the new extension, so design-042.dst becomes design-042.pes. That keeps a library searchable when you keep both versions side by side on the machine's USB stick.
Some machines only list files in a specific folder or show a limited number of characters from each name. Short names without spaces are the safest choice when you copy converted files over.
DST format at a glance
| Format | Full name | Used by | Stores colors | What is inside |
|---|---|---|---|---|
| DST | Tajima DST stitch file | Tajima and most commercial multi-needle machines (Ricoma, SWF, Happy and others) | No. Only color stops are stored; you assign threads at the machine. | A list of needle moves in 0.1 mm steps with jump, trim and color-stop records, plus a 512-byte header holding the stitch count and design extents. |
Hoop sizes and the sewable field
The converter keeps the stitches at their original size. It measures the design and reports the smallest hoop below that holds it with 5 mm clear on each side.
| Hoop | Stated size | Sewable field used | Example machines |
|---|---|---|---|
| 4 x 4 in | 100 x 100 mm | 90 x 90 mm | Brother SE600, SE700 and PE535, plus most entry-level combo machines |
| 5 x 7 in | 130 x 180 mm | 120 x 170 mm | Brother PE800, PE900 and SE1900 |
| 6 x 10 in | 160 x 260 mm | 150 x 250 mm | Brother NQ1700E and other mid-range machines |
| 8 x 8 in | 200 x 200 mm | 190 x 190 mm | Janome Memory Craft 400E class (7.9 x 7.9 in field) |
| 8 x 12 in | 200 x 300 mm | 190 x 290 mm | Large-field home and commercial flats; check your hoop's stated field |
What the stitch engine produces
| Setting | Value |
|---|---|
| Fill density | 0.4 mm row spacing (tatami), brick-staggered stitch ends |
| Fill stitch length | up to 3.0 mm |
| Underlay | perpendicular rows every 2.0 mm, inset 0.5 mm |
| Thin shapes (under about 1.2 mm) | running stitch along the outline, 2.0 mm stitches |
| Trims | added for any travel longer than 7 mm, with tie-in and tie-off stitches |
| Hoop clearance | 5 mm kept free on every side |
| Smallest design | 5 mm on the short side (smaller is refused, not charged) |
| Upload limit | 25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG |
| Typical processing time | under 3 seconds for a 5x7 logo |
The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.
DST file converter FAQ
How do I open a DST file?
Upload it here to see a stitch preview, stitch count and size, or open it in embroidery software such as Ink/Stitch, Embrilliance or your machine brand's app.
Does converting DST to PES lose quality?
No. The converter copies stitch positions exactly. Only the color information differs, because DST has none to begin with.
Can the DST file converter resize a design?
Not as a stitch file. Resizing stitches changes density. Convert the original artwork at the new size instead.
Which machines read DST directly?
Tajima and most commercial multi-needle machines, including Ricoma, SWF and Happy. Many home machines read it too, but check your manual.