Skip to content
Stitch file to stitch file

DST to PES converter

To convert DST to PES, upload the .dst file, keep PES selected and download the result. The tool copies every stitch, jump, trim and color stop exactly into the Brother format. Because DST files have no thread colors, the PES gets placeholder colors that you can change on the machine screen.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

DST, PES, JEF, EXP, VP3 up to 25 MB

How to convert DST to PES, step by step

  1. Upload the DST file.
  2. Confirm that PES shows as the output.
  3. Check the stitch count and the smallest hoop the design fits.
  4. Download the PES and set thread colors on your Brother machine.
Example

DST to PES tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

DST to PES result: preview of a four-color badge
Output preview from our DST to PES test run
Test file
DST made from the same badge
Output
PES
Finished size
90.1 x 89.6 mm
Hoop it fits
4 x 4 in
Stitches
6,823
Thread colors
4
File size
57 KB
Processing time
0.2 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

Why a DST from a shop needs converting

Commercial digitizers deliver DST by default because every multi-needle machine reads it. Home Brother machines often read DST as well, but the PES gives you a proper on-screen preview, size check and editable color list, which makes it easier to work with.

In fact, the conversion is lossless for the stitches. The tool recalculates nothing, so the design sews exactly as the digitizer made it.

Checking hoop fit before you convert

The converter also measures the design and reports the smallest standard hoop it fits with 5 mm clearance. If the answer is 6 x 10 and your machine has a 4 x 4 field, the file will not load, and resizing a stitch file by more than about 20 percent ruins its density. Ask the digitizer for a smaller version instead.

Assigning Brother thread colors

After loading the converted PES, open the color change screen and pick the nearest Brother thread for each stop. If the digitizer sent a color sheet with the DST, follow it in order: stop one is the first color on the sheet, stop two the second, and so on.

When the colors look right, save the design on the machine. The machine keeps its own copy with your colors, so you do not have to repeat the step next time.

No sheet? Then the preview here shows each block in sequence, which makes it easy to tell the outline from the fill and pick sensible colors.

DST and PES compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
DSTTajima DST stitch fileTajima and most commercial multi-needle machines (Ricoma, SWF, Happy and others)No. Only color stops are stored; you assign threads at the machine.A list of needle moves in 0.1 mm steps with jump, trim and color-stop records, plus a 512-byte header holding the stitch count and design extents.
PESBrother PES embroidery fileBrother and Baby Lock home and multi-needle machinesYes, as thread colors in the embedded PEC block.Brother's design format. It wraps a PEC block, which is the part the machine actually sews and which carries thread colors and a small thumbnail.

Hoop sizes and the sewable field

The converter keeps the stitches at their original size. It measures the design and reports the smallest hoop below that holds it with 5 mm clear on each side.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

DST to PES FAQ

Is DST to PES conversion lossless?

For stitches, yes. The tool copies the positions exactly. Colors are placeholders because DST stores none.

Can I convert many DST files at once?

Batch conversion is part of the Pro plan. The free tier, however, converts one file at a time.

Which PES version does the tool write?

A widely compatible PES version with the PEC block that Brother machines sew from.

Can I go back from PES to DST?

Yes, on the PES to DST page.

Sources and references