Skip to content
Image to embroidery

SVG to DST converter

To convert SVG to DST, upload the SVG, choose how many thread colors it uses and your hoop, then download the DST. The vector is rendered at high resolution, so edges are perfectly clean, and each fill color becomes a stitched region with underlay. Strokes thinner than about 1.2 mm become running stitches.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB

How to convert SVG to DST, step by step

  1. Export the SVG with fills rather than hairline strokes where you want solid stitching.
  2. Upload it and set the color count to the number of fill colors in the file.
  3. Choose the hoop or enter the finished width in millimeters.
  4. Check the preview, especially thin lines and small text, then download the DST.
Example

SVG to DST tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

SVG to DST result: preview of a four-color badge
Output preview from our SVG to DST test run
Test file
SVG, 400 x 400 viewBox, rendered at 800 px
Output
DST
Finished size
90 x 90 mm
Hoop it fits
4 x 4 in
Stitches
6,823
Thread colors
4
Trims
24
File size
22 KB
Processing time
0.3 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

Vector in, stitches out

An SVG already has perfect edges, so the only real decision left is how to stitch each shape. The converter renders the SVG to pixels at high resolution, reads back the fill colors and generates tatami fill for each region, with perpendicular underlay rows to hold the fabric flat.

Because the source is clean, SVG files are where automatic conversion gives its best results. Text converted to outlines, simple badges and single-color monograms usually sew well on the first try.

Strokes, gradients and embedded images

Hairline strokes have no width to fill, so they either disappear or become running stitches if they render at least a couple of tenths of a millimeter wide at your chosen size. If a line matters, make it a filled shape at least 1.5 mm wide.

Gradients are reduced to flat thread colors, and embedded bitmaps are traced like any other image. For cutting instead of stitching, the same file can go to DXF for a laser without any conversion at all.

Preparing an SVG in Inkscape or Illustrator

Before exporting, convert text to outlines (Object to Path in Inkscape, Create Outlines in Illustrator) so the font does not change on another computer. Merge shapes of the same color that overlap, and delete hidden layers, guides and artboard backgrounds, because anything that renders is traced.

Keep the palette small. Every distinct fill color becomes a thread change, so a logo with a subtle two-tone shadow becomes two extra stops. Flatten those shades to one color unless the shading is part of the design.

SVG and DST compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
SVGSVG vector graphicAny design or cutting softwareYes, as fill colorsShapes stored as paths rather than pixels, so they scale to any size. Cricut Design Space and Silhouette Studio import it directly.
DSTTajima DST stitch fileTajima and most commercial multi-needle machines (Ricoma, SWF, Happy and others)No. Only color stops are stored; you assign threads at the machine.A list of needle moves in 0.1 mm steps with jump, trim and color-stop records, plus a 512-byte header holding the stitch count and design extents.

Hoop sizes and the sewable field

The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

SVG to DST FAQ

Is SVG to DST better than PNG to DST?

Usually yes, because the edges are exact. The stitching logic is the same, so the difference shows mainly on small text and sharp corners.

Does it keep my SVG colors?

The preview uses them, and PES, JEF and VP3 outputs store them. DST itself never stores thread colors, only color stops.

Can it make satin stitches from SVG strokes?

No. Strokes become running stitch and filled shapes become tatami fill. Satin columns need manual digitizing, for example in Ink/Stitch.

What SVG size should I export?

Size does not matter for quality, because the file is rendered fresh. Set the finished size in millimeters in the converter instead.

Sources and references