Skip to content
Image to embroidery

PNG to EXP converter for Bernina and Melco

To convert PNG to EXP, upload the PNG, choose the thread color count and hoop, and download the EXP file. EXP is a compact stitch-only format that Bernina home machines and Melco commercial machines read directly. Colors are not stored in the EXP, so you assign threads at the machine.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB

How to convert PNG to EXP, step by step

  1. Upload the PNG and set the number of thread colors.
  2. Choose the hoop closest to your Bernina or Melco field.
  3. Note the color order shown in the preview.
  4. Download the EXP and assign threads to each color stop at the machine.
Example

PNG to EXP tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

PNG to EXP result: preview of a four-color badge
Output preview from our PNG to EXP test run
Test file
PNG, 800 x 800 px, four colors on white
Output
EXP
Finished size
90 x 90 mm
Hoop it fits
4 x 4 in
Stitches
6,823
Thread colors
4
Trims
24
File size
16 KB
Processing time
0.4 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

EXP on Bernina machines

Bernina home embroidery machines have long read EXP files, historically alongside an INF file that holds the color list. Without the INF, the machine sews the same stitches and simply shows default colors, which you can change before you start.

Newer Bernina software also reads other formats, but EXP remains the one almost every Bernina model accepts, which makes it a safe choice when you do not know the exact model.

EXP on Melco commercial machines

Melco's expanded format stores moves in 0.1 mm steps, the same resolution the converter works at internally, so nothing is rounded twice. Shops running Melco heads can use the EXP directly or import it into their design software for lettering and layout.

Color order: from PNG colors to EXP stops

Because EXP stores color stops but not colors, the machine shows the stops in sequence with placeholder colors. The preview on this page draws each block in the color detected from your PNG, largest area first, then smaller details. Sew in the same order: large fills first give the details a stable base.

Write the order down before you leave the computer. A short list such as navy, then white, then red is all you need at the machine.

If you sew the same logo often, save the thread list with the file name so the next run takes seconds to set up.

PNG and EXP compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
PNGPNG imageAny design or cutting softwareYes, as fill colorsA lossless pixel image that can carry transparency, which makes it the easiest source for clean edges.
EXPMelco Expanded stitch fileMelco commercial machines and Bernina home machinesNo. Bernina keeps colors in a separate INF file.A compact stitch-only format with 0.1 mm moves. Bernina reads it directly, which is why it matters well beyond Melco.

Hoop sizes and the sewable field

The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

PNG to EXP FAQ

Does EXP store thread colors?

No. It stores stitches and color stops only. Bernina keeps colors in a separate INF file.

Should I use EXP or ART for Bernina?

ART is Bernina's native design format and needs Bernina software to create. EXP is the widely supported stitch file that the machines read directly.

Can I convert EXP to PES?

Yes. Upload the EXP on the DST file converter page and choose PES.

Does the EXP center my PNG design in the hoop?

Yes. The converter centers the design on the hoop origin, which is how most machines position a design by default.

Sources and references