PNG to DST converter
To convert PNG to DST, upload the PNG, pick your hoop and the number of thread colors, then download the Tajima DST file. The converter traces each color into fill regions, scales them to the hoop in millimeters, and writes real stitches with underlay, trims and color stops.
By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .
PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB
How to convert PNG to DST, step by step
- Upload a PNG, ideally 1000 pixels or more on the long side with a transparent or flat background.
- Choose the thread color count. Count the solid colors in the logo and ignore anti-aliased edge shades.
- Pick the hoop your machine uses; the design is fitted inside it with 5 mm clearance on every side.
- Check the stitch preview, stitch count and finished size in millimeters and inches.
- Download the DST and load it onto the machine by USB stick or your usual transfer software.
PNG to DST tested with a real logo
We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

- Test file
- PNG, 800 x 800 px, four colors on white
- Output
- DST
- Finished size
- 90 x 90 mm
- Hoop it fits
- 4 x 4 in
- Stitches
- 6,823
- Thread colors
- 4
- Trims
- 24
- File size
- 22 KB
- Processing time
- 0.4 s
How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.
Why PNG is the best source for a DST
PNG is lossless, so the edge between the red and the white of a logo is a clean step rather than a smear of in-between shades. That matters because the converter has to decide where each fill region ends, and every stray pixel it sees becomes a question it has to answer. A PNG exported straight from the design file gives the cleanest answer.
Transparency helps too. When the background is transparent, nothing about it gets stitched, and the converter does not have to guess which color is the fabric. If your PNG has a white box behind the logo, that works as well: the dominant border color is treated as background automatically.
What a DST can and cannot hold
A DST stores needle moves, jumps, trims and color stops. It does not store thread colors, which is why the machine asks you which needle to use for each stop. Write the thread sequence down from the preview before you walk to the machine; the colors on screen are the ones we detected in your PNG.
Because DST moves are limited to 12.1 mm per record, long travels are broken into several jump records. The converter adds a trim before any travel longer than 7 mm, so you do not get long connecting threads across the design.
PNG and DST compared
| Format | Full name | Used by | Stores colors | What is inside |
|---|---|---|---|---|
| PNG | PNG image | Any design or cutting software | Yes, as fill colors | A lossless pixel image that can carry transparency, which makes it the easiest source for clean edges. |
| DST | Tajima DST stitch file | Tajima and most commercial multi-needle machines (Ricoma, SWF, Happy and others) | No. Only color stops are stored; you assign threads at the machine. | A list of needle moves in 0.1 mm steps with jump, trim and color-stop records, plus a 512-byte header holding the stitch count and design extents. |
Hoop sizes and the sewable field
The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.
| Hoop | Stated size | Sewable field used | Example machines |
|---|---|---|---|
| 4 x 4 in | 100 x 100 mm | 90 x 90 mm | Brother SE600, SE700 and PE535, plus most entry-level combo machines |
| 5 x 7 in | 130 x 180 mm | 120 x 170 mm | Brother PE800, PE900 and SE1900 |
| 6 x 10 in | 160 x 260 mm | 150 x 250 mm | Brother NQ1700E and other mid-range machines |
| 8 x 8 in | 200 x 200 mm | 190 x 190 mm | Janome Memory Craft 400E class (7.9 x 7.9 in field) |
| 8 x 12 in | 200 x 300 mm | 190 x 290 mm | Large-field home and commercial flats; check your hoop's stated field |
What the stitch engine produces
| Setting | Value |
|---|---|
| Fill density | 0.4 mm row spacing (tatami), brick-staggered stitch ends |
| Fill stitch length | up to 3.0 mm |
| Underlay | perpendicular rows every 2.0 mm, inset 0.5 mm |
| Thin shapes (under about 1.2 mm) | running stitch along the outline, 2.0 mm stitches |
| Trims | added for any travel longer than 7 mm, with tie-in and tie-off stitches |
| Hoop clearance | 5 mm kept free on every side |
| Smallest design | 5 mm on the short side (smaller is refused, not charged) |
| Upload limit | 25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG |
| Typical processing time | under 3 seconds for a 5x7 logo |
The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.
PNG to DST FAQ
Can I convert a PNG to DST for free?
Yes. You get three free conversions a day with the full preview and a working DST. Packs and plans only matter if you convert files most weeks.
What size should my PNG be?
Aim for at least 1000 pixels on the long edge. Under about 500 pixels the edges are already soft, and the trace follows that softness because it cannot tell it was not intended.
Why does the DST open without colors in my software?
DST files do not store thread colors, only color stops. Your software shows default colors until you assign threads. PES, JEF and VP3 do keep colors if you need them.
Will the result match a hand-digitized file?
Not for fine work. The converter makes tatami fills with underlay and running stitch for thin lines, but no satin columns and no pull compensation. Flat logos on caps and left chests are where it does well.