PNG to VP3 converter
To convert PNG to VP3, upload the PNG, pick the thread colors and hoop, and download the VP3 file used by Husqvarna Viking and Pfaff embroidery machines. The VP3 stores each color block with its thread color, so the machine screen shows the design as it will sew.
By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .
PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB
How to convert PNG to VP3, step by step
- Upload the PNG artwork.
- Choose the color count and your hoop size.
- Review the preview and stitch count.
- Download the VP3 and copy it to the machine with a USB stick.
PNG to VP3 tested with a real logo
We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

- Test file
- PNG, 800 x 800 px, four colors on white
- Output
- VP3
- Finished size
- 90 x 90 mm
- Hoop it fits
- 4 x 4 in
- Stitches
- 6,823
- Thread colors
- 4
- Trims
- 24
- File size
- 14 KB
- Processing time
- 0.4 s
How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.
One format for two brands
Husqvarna Viking and Pfaff share the VP3 format, so a single file works on machines from both brands. The file stores color blocks with thread information, which makes it more descriptive than a DST.
If you run a mixed studio, VP3 for the Viking and Pfaff machines plus PES for the Brothers covers most home embroidery.
Hoop choice for a PNG to VP3 design
These machines offer many hoop shapes. Pick the standard size here that is smaller than or equal to your hoop's sewable field; the design is fitted inside that size with a 5 mm margin and centered, so it can be placed wherever you like on the machine.
Loading and sizing on the machine
Copy the VP3 to a USB stick and open it from the machine's file manager, or send it with the brand's desktop or mobile software if your model supports that. The design opens centered, and you can move it within the hoop on screen.
Many Viking and Pfaff machines offer on-screen resizing. Small changes are fine, but large changes alter stitch density, so for anything beyond about 20 percent, convert the PNG again at the new size here instead.
The stitch preview on this page shows the order in which colors sew. Pfaff and Viking machines show the same sequence, so you can match threads before you start.
In addition, hooping matters as much as the file. Float a layer of cut-away stabilizer under knit garments, and keep the fabric taut but not stretched, so the fill rows lie flat.
PNG and VP3 compared
| Format | Full name | Used by | Stores colors | What is inside |
|---|---|---|---|---|
| PNG | PNG image | Any design or cutting software | Yes, as fill colors | A lossless pixel image that can carry transparency, which makes it the easiest source for clean edges. |
| VP3 | Husqvarna Viking / Pfaff VP3 file | Husqvarna Viking and Pfaff home machines | Yes, with thread names and colors per block. | The shared format of Husqvarna Viking and Pfaff. It stores color blocks with thread metadata alongside the stitches. |
Hoop sizes and the sewable field
The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.
| Hoop | Stated size | Sewable field used | Example machines |
|---|---|---|---|
| 4 x 4 in | 100 x 100 mm | 90 x 90 mm | Brother SE600, SE700 and PE535, plus most entry-level combo machines |
| 5 x 7 in | 130 x 180 mm | 120 x 170 mm | Brother PE800, PE900 and SE1900 |
| 6 x 10 in | 160 x 260 mm | 150 x 250 mm | Brother NQ1700E and other mid-range machines |
| 8 x 8 in | 200 x 200 mm | 190 x 190 mm | Janome Memory Craft 400E class (7.9 x 7.9 in field) |
| 8 x 12 in | 200 x 300 mm | 190 x 290 mm | Large-field home and commercial flats; check your hoop's stated field |
What the stitch engine produces
| Setting | Value |
|---|---|
| Fill density | 0.4 mm row spacing (tatami), brick-staggered stitch ends |
| Fill stitch length | up to 3.0 mm |
| Underlay | perpendicular rows every 2.0 mm, inset 0.5 mm |
| Thin shapes (under about 1.2 mm) | running stitch along the outline, 2.0 mm stitches |
| Trims | added for any travel longer than 7 mm, with tie-in and tie-off stitches |
| Hoop clearance | 5 mm kept free on every side |
| Smallest design | 5 mm on the short side (smaller is refused, not charged) |
| Upload limit | 25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG |
| Typical processing time | under 3 seconds for a 5x7 logo |
The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.
PNG to VP3 FAQ
Do Pfaff machines read VP3?
Yes. Pfaff and Husqvarna Viking embroidery machines both use VP3.
Does VP3 keep thread colors?
Yes, each color block carries its thread color.
Can I convert VP3 to PES or DST?
Yes. Upload the VP3 on the DST file converter page and pick the output.
What if my machine only lists VIP or HUS?
Those are older Viking formats. Check whether the machine also reads VP3; many do after firmware updates. If not, use desktop software to convert.