Skip to content
Image to embroidery

JPG to PES converter

To convert JPG to PES, upload the JPEG, choose a small color count, pick the hoop your Brother or Baby Lock machine uses and download the PES. The converter filters compression noise, merges similar shades into single thread colors, and stores those colors in the PES so the machine shows them correctly.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB

How to convert JPG to PES, step by step

  1. Upload the biggest version of the JPG you have.
  2. Choose two to four colors for a typical logo.
  3. Select the hoop, then look at the preview for rough edges or stray specks.
  4. Download the PES and stitch a test on scrap fabric first.
Example

JPG to PES tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

JPG to PES result: preview of a four-color badge
Output preview from our JPG to PES test run
Test file
JPG, 800 x 800 px, quality 88
Output
PES
Finished size
90 x 90 mm
Hoop it fits
4 x 4 in
Stitches
6,752
Thread colors
4
Trims
26
File size
55 KB
Processing time
0.5 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

Turning a phone photo of a logo into a PES

Customers often send a photo of a sign or an old shirt. Crop it tightly around the logo before uploading, because the background detection looks at the image border: if the border is mostly one color, it is treated as fabric.

Shadows and uneven lighting become extra color regions. If the preview shows a darker patch where the photo was shaded, lower the color count by one or even out the lighting in any photo editor first.

Thread colors from a JPG

The colors written into the PES come from the image itself, averaged over each region. They are close to the artwork, not matched to a specific thread brand, so treat them as a guide and pick the nearest thread from your own chart.

Brother machines let you change each color stop on screen, and the change does not affect the stitches.

Checking the result on a Brother screen

When you load the PES, the machine shows the design with its thread colors and its size. Compare that size with the line under our preview; they should match to within a millimeter. If the machine shows the design smaller than expected, the width you entered was probably limited by the hoop, which the converter reports as well.

Step through the color stops on the machine before sewing. A JPG sometimes produces two very similar colors that you may want to sew with the same spool, which you can do by simply keeping the same thread for both stops.

JPG and PES compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
JPGJPEG imageAny design or cutting softwareYes, as fill colorsA compressed photo format. Compression leaves faint halos around edges, which is why JPGs need a little cleanup before tracing.
PESBrother PES embroidery fileBrother and Baby Lock home and multi-needle machinesYes, as thread colors in the embedded PEC block.Brother's design format. It wraps a PEC block, which is the part the machine actually sews and which carries thread colors and a small thumbnail.

Hoop sizes and the sewable field

The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

JPG to PES FAQ

Can I use a screenshot as the source?

Only if it is large and sharp. Screenshots of small web logos usually lack the detail for clean stitching.

Is there a free JPG to PES converter?

This one is free for three conversions a day with a full preview and a usable PES.

What stabilizer should I use for the test sew?

Match the final garment. Tear-away for stable woven fabrics, cut-away for knits and polos.

Can the JPG have text in it?

Yes, but lettering under about 4 mm tall closes up once stitched, whatever the file says.

Sources and references