Skip to content
Image to embroidery

PDF to DST converter

To convert a PDF to DST, upload the PDF and the converter renders its first page at 1600 pixels on the long side, traces the artwork into thread colors, fits it to your hoop and writes a DST. Put the logo alone on page one; everything visible on that page is treated as part of the design.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB

How to convert PDF to DST, step by step

  1. Make sure the logo is on the first page of the PDF, without crop marks, text blocks or color swatches around it.
  2. Then upload the PDF and set the thread color count from the brand colors.
  3. Pick the hoop, or type the finished width in millimeters for a left chest or cap front.
  4. Review the preview and the stitch count, then download the DST.
Example

PDF to DST tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

PDF to DST result: preview of a four-color badge
Output preview from our PDF to DST test run
Test file
one-page PDF with the badge as a JPEG
Output
DST
Finished size
90 x 90 mm
Hoop it fits
4 x 4 in
Stitches
6,669
Thread colors
3
Trims
24
File size
22 KB
Processing time
1.1 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

Why a PDF is often the best file a customer has

Brand guidelines, print proofs and logo packs are usually delivered as PDFs, and most of them contain vector artwork underneath. Rendering that vector at high resolution produces edges as clean as a PNG exported from the original design program, without the halos a JPEG would add.

That is why a PDF from the customer's printer is usually a better source than the JPG on their website, even though both look identical on screen.

Preparing a multi-page or busy PDF

The converter only reads page one. If the logo sits on page three of a brand book, print that page to a new PDF first, or crop it with any PDF viewer's export tool. Remove registration marks, Pantone chips and text captions, because the tracer will stitch anything that is not the background color.

If the PDF uses a colored page background, the converter detects the dominant border color and treats it as fabric, so a solid backdrop is fine. However, a gradient backdrop is not, so remove it before upload.

PDF and DST compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
PDFPDF documentAny design or cutting softwareYes, as fill colorsOften how brand artwork travels. We render the first page at high resolution and trace what is on it.
DSTTajima DST stitch fileTajima and most commercial multi-needle machines (Ricoma, SWF, Happy and others)No. Only color stops are stored; you assign threads at the machine.A list of needle moves in 0.1 mm steps with jump, trim and color-stop records, plus a 512-byte header holding the stitch count and design extents.

Hoop sizes and the sewable field

The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

PDF to DST FAQ

Can I convert a PDF to an embroidery file for free?

Yes, within the three free conversions per day. The DST is fully usable; paid plans remove limits and add larger hoops.

Which PDF page becomes the DST design?

The first page. Export the page you want as a single-page PDF if the logo is elsewhere.

Can I get PES or JEF from a PDF too?

Yes. Switch the output format in the converter; the same PDF produces PES, JEF, EXP or VP3.

My PDF is password protected. Will it work?

No. Remove the open password first, because the converter cannot read encrypted pages.

Sources and references