Skip to content
Stitch file to stitch file

PES to DST converter

To convert PES to DST, upload the .pes file, choose DST and download it. The tool copies stitches, jumps, trims and color changes exactly into the Tajima format that commercial multi-needle machines read. Write down the color order from the preview, because a DST cannot carry thread colors.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

DST, PES, JEF, EXP, VP3 up to 25 MB

How to convert PES to DST, step by step

  1. Upload the PES file.
  2. Select DST as the output.
  3. Note the color sequence shown in the preview.
  4. Download the DST and assign needles on the commercial machine.
Example

PES to DST tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

PES to DST result: preview of a four-color badge
Output preview from our PES to DST test run
Test file
PES made from the same badge
Output
DST
Finished size
90.1 x 89.6 mm
Hoop it fits
4 x 4 in
Stitches
6,823
Thread colors
4
File size
27 KB
Processing time
0.1 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

Moving a home design to a production machine

Designs bought for Brother home machines often arrive as PES only. When an order grows beyond what a single-needle machine can handle, a multi-needle machine needs the same design as DST. The conversion keeps the stitches exactly, so the result matches the original sew-out.

Commercial machines, however, let you map each color stop to a needle. The preview on this page shows the stops in order, which is all you need to set up the needle sequence.

Long stitches and jumps

A single DST record can move at most 12.1 mm. Longer moves in the PES therefore become several records, which the machine still treats as one travel. As a result, nothing needs adjusting on your side.

Expect more trims than the original showed, though. When the tool reads a PES, its PEC block flags every jump as a trim. That is why our PES to DST test reports 546 trims, while the DST to PES test reports only 24.

Checking the design before a production run

Home designs are often digitized for 4 x 4 hoops with dense fills. On a multi-needle machine running at higher speed, test one piece on the real garment first and watch for thread breaks in the densest areas. If breaks happen, slow the machine for that color rather than editing the file.

The stitch count and size also help you price the job. Most shops quote embroidery by thousands of stitches, so the number under the preview is the one to use.

Keep the original PES next to the new DST so you can return to it if the customer later wants a sample on a home machine.

PES and DST compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
PESBrother PES embroidery fileBrother and Baby Lock home and multi-needle machinesYes, as thread colors in the embedded PEC block.Brother's design format. It wraps a PEC block, which is the part the machine actually sews and which carries thread colors and a small thumbnail.
DSTTajima DST stitch fileTajima and most commercial multi-needle machines (Ricoma, SWF, Happy and others)No. Only color stops are stored; you assign threads at the machine.A list of needle moves in 0.1 mm steps with jump, trim and color-stop records, plus a 512-byte header holding the stitch count and design extents.

Hoop sizes and the sewable field

The converter keeps the stitches at their original size. It measures the design and reports the smallest hoop below that holds it with 5 mm clear on each side.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

PES to DST FAQ

Will the DST sew the same as the PES?

Yes. The stitches are identical, while only the file container and color information change.

Why are my colors gone in the DST?

DST has no field for thread colors. Use the preview to note the sequence and set it on the machine.

Can I convert PES to JEF instead?

Yes. Choose JEF as the output after uploading.

Is it safe to upload purchased designs?

The tool keeps files in memory only and never stores them. Check the design's license before converting it for commercial use.

Sources and references