Skip to content
Image to embroidery

PNG to JEF converter

To convert PNG to JEF, upload the PNG, select the thread colors and the hoop that matches your Janome, then download the JEF file. The file stores the design, the thread colors and a hoop code, so the machine can confirm the design fits before you start sewing.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB

How to convert PNG to JEF, step by step

  1. Upload the PNG artwork.
  2. Choose the thread color count and the hoop size closest to your Janome hoop.
  3. Check the finished size and stitch count under the preview.
  4. Download the JEF and transfer it with a USB stick or Janome's transfer software.
Example

PNG to JEF tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

PNG to JEF result: preview of a four-color badge
Output preview from our PNG to JEF test run
Test file
PNG, 800 x 800 px, four colors on white
Output
JEF
Finished size
90 x 90 mm
Hoop it fits
4 x 4 in
Stitches
6,823
Thread colors
4
Trims
24
File size
16 KB
Processing time
0.3 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

JEF and Janome hoops

Janome machines ship with hoops of several shapes, and the JEF records which hoop a design was made for. If you pick a hoop here that is larger than the one on the machine, the machine will refuse the design or ask you to change hoops, which is a useful safety check rather than an error.

When in doubt, choose the smallest hoop the design should fit. The converter fits artwork inside that field with 5 mm clearance.

Elna and Kenmore machines

Several Elna and some older Kenmore embroidery models are built on Janome hardware and read JEF files. Check the file types listed in your manual; if JEF is there, this page produces the right file.

If your machine lists JEF+ or a different variant, the plain JEF written here is still the most widely readable choice.

Getting a JEF made from a PNG onto a Janome

Most current Janome embroidery machines accept a USB stick. Copy the JEF into the folder structure your model expects; the manual lists it, and many machines only show files placed in their own embroidery folder. Older models that use cards or a cable need Janome's transfer software on a computer.

If the machine shows the file but refuses to open it, check the hoop setting first. A design made for a large hoop will not open while a smaller hoop is selected.

Keep a copy of the source PNG next to the JEF. If you later need the same design for a different hoop, convert the PNG again at the new size rather than scaling the JEF on the machine, which changes stitch density.

PNG and JEF compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
PNGPNG imageAny design or cutting softwareYes, as fill colorsA lossless pixel image that can carry transparency, which makes it the easiest source for clean edges.
JEFJanome JEF embroidery fileJanome, plus Elna and some Kenmore models built on Janome hardwareYes, as indexes into the Janome thread chart.Janome's stitch format. It records a hoop code with the design, so the machine can warn when a design does not fit.

Hoop sizes and the sewable field

The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

PNG to JEF FAQ

Which machines read JEF?

Janome embroidery machines, plus Elna and some Kenmore models that share Janome hardware.

Does the JEF keep the colors from my PNG?

Yes, as references to the Janome thread chart, chosen as the closest match to your artwork.

Can I convert JEF to DST?

Yes. Upload the JEF on the DST file converter page and choose DST as the output.

Why is the stitch count so high?

Large solid fills use many stitches. Reduce the finished size or simplify big background shapes that do not need to be stitched.

Sources and references