Skip to content
Image to embroidery

PNG to PES converter

To convert PNG to PES, upload the PNG, set the thread color count, choose your Brother hoop (4 x 4 for SE600 and PE535, 5 x 7 for PE800 and SE1900) and download the PES. Unlike DST, the PES keeps the detected thread colors, so the machine screen shows the design in its real colors.

By The Stitchquill team (Machine embroidery and cut-file workflow). Last updated .

Convert

PNG, JPG, JPEG, WEBP, GIF, BMP, TIF, TIFF, PDF, SVG up to 25 MB

How to convert PNG to PES, step by step

  1. Upload a clean PNG with a transparent or single-color background.
  2. Set the thread color count and choose 4 x 4 or 5 x 7 to match your Brother hoop.
  3. Check the preview, because the PES stores the colors you see there.
  4. Download the PES and copy it to a USB stick in the machine's usual folder.
Example

PNG to PES tested with a real logo

We ran our own four-color badge through this exact converter. The picture shows the preview it returned. The numbers come from the same run, so you can compare them with your own file. For example, the badge has a ring, a sun, two peaks and a band, like a typical shop logo.

PNG to PES result: preview of a four-color badge
Output preview from our PNG to PES test run
Test file
PNG, 800 x 800 px, four colors on white
Output
PES
Finished size
90 x 90 mm
Hoop it fits
4 x 4 in
Stitches
6,823
Thread colors
4
Trims
24
File size
57 KB
Processing time
0.4 s

How we test: we check every page with the same badge, then we read each output back with pyembroidery or open it as a vector. More on the about page.

Why Brother owners should pick PES over DST

Brother home machines read PES natively and many read DST as well, but a DST arrives with no colors, so every color stop shows up with a default thread. A PES carries the thread colors inside its PEC block, which is the part the machine actually sews, so the on-screen preview matches your artwork.

The PES also records the design size, and Brother machines use it to tell you immediately whether the design fits the hoop you have attached.

Getting the size right for a 4 x 4 hoop

On machines like the SE600, the 4 x 4 field is 100 by 100 mm on paper, but the needle cannot reach the very edge reliably. The converter keeps 5 mm clear on every side, so a 4 x 4 design is at most 90 by 90 mm.

If the logo is wide and short, it may end up only a couple of centimeters tall at that width. The size line under the preview shows this before you download, so you can switch to 5 x 7 or rethink the layout.

PNG and PES compared

File formats involved in this conversion
FormatFull nameUsed byStores colorsWhat is inside
PNGPNG imageAny design or cutting softwareYes, as fill colorsA lossless pixel image that can carry transparency, which makes it the easiest source for clean edges.
PESBrother PES embroidery fileBrother and Baby Lock home and multi-needle machinesYes, as thread colors in the embedded PEC block.Brother's design format. It wraps a PEC block, which is the part the machine actually sews and which carries thread colors and a small thumbnail.

Hoop sizes and the sewable field

The converter fits each design inside the sewable field, which is the stated hoop size minus 5 mm on each side. So a design sized for 4 x 4 sews on every machine in this table.

Standard hoops the converter targets
HoopStated sizeSewable field usedExample machines
4 x 4 in100 x 100 mm90 x 90 mmBrother SE600, SE700 and PE535, plus most entry-level combo machines
5 x 7 in130 x 180 mm120 x 170 mmBrother PE800, PE900 and SE1900
6 x 10 in160 x 260 mm150 x 250 mmBrother NQ1700E and other mid-range machines
8 x 8 in200 x 200 mm190 x 190 mmJanome Memory Craft 400E class (7.9 x 7.9 in field)
8 x 12 in200 x 300 mm190 x 290 mmLarge-field home and commercial flats; check your hoop's stated field

What the stitch engine produces

Stitch engine settings and limits
SettingValue
Fill density0.4 mm row spacing (tatami), brick-staggered stitch ends
Fill stitch lengthup to 3.0 mm
Underlayperpendicular rows every 2.0 mm, inset 0.5 mm
Thin shapes (under about 1.2 mm)running stitch along the outline, 2.0 mm stitches
Trimsadded for any travel longer than 7 mm, with tie-in and tie-off stitches
Hoop clearance5 mm kept free on every side
Smallest design5 mm on the short side (smaller is refused, not charged)
Upload limit25 MB; PNG, JPG, WEBP, GIF, BMP, TIFF, PDF, SVG
Typical processing timeunder 3 seconds for a 5x7 logo

The engine does not make satin columns, pull compensation or per-fabric density changes. For fine lettering or premium garments, refine the file in digitizing software or hire a digitizer instead.

Questions

PNG to PES FAQ

Which Brother machines read PES?

Brother embroidery and combo machines, including the SE and PE series, and Baby Lock machines, which share the format.

Does the PES keep my colors?

Yes. The converter writes the detected colors as thread colors, and you can still change them on the machine.

My machine says the design is too large. Why?

The file probably targets a bigger hoop. Convert again with the 4 x 4 hoop selected, and the converter fits the design inside 90 by 90 mm.

Can I convert PES back to PNG?

The converter shows a PNG preview of any PES you upload, which you can save from the preview panel.

Sources and references